BIAX

BIAX

Biax fibreglass is a material woven from fibres under an angle of 90°. Snowboards in which it is used are more pliant, and more forgiving of mistakes. Yet they still maintain their excellent flexibility and torsional hardness, i.e. they have great grip in a turn. The biaxial boards will easily overcome uneven terrain. Thanks to their easier controllability, they‘re ideal for women and children, and lighter riders in general.

CAMBER

CAMBER

The camber represents the snowboard‘s traditional curve, when the unloaded board only touches the ground in two places. When riding, the edge is in contact with the snow along its entire length, and with even greater pressure on the two afore-mentioned contact points. Such a snowboard is easy to control. The transition from edge to edge is smooth. The board is easy to control even at higher speeds, and on a harder, more aggressive surface.

CAMROCK

CAMROCK

Camrock combines the best of camber and rocker in one. Cam-Rock takes pressure off on contact points on the tip and tail thereby allowing a freer ride as a rocker. Camber zones, which are located under the bindings, provide greater control during riding on the edge.

CARBON

CARBON

Carbon fibers are composed of atomic carbon which are arranged in the microscopic crystals. The crystalline structure of the fibers is extremely rigid, although still very light. Snowboards which are containing carbon are solid, flexible, excellent in the holding an arc and also considerably lighter.

DIRECTIONAL

DIRECTIONAL

Directional is classic and most universal shape of boards, designed with slightly longer nose so the pop concentrate into the heel area while still offering plenty of control in all terrains and conditions.

EXTRUDED

EXTRUDED

The extruded base is durable and low-maintenance. It will withstand hard treatment on the slopes, off them, in parks or on rails. It‘s made from polyethylene particles which are melted and subsequently formed into the required shape. The resulting base is truly seamless, non-porous and very durable. It will never hold wax as well as a sintered base, which is why it‘s slower compared to a waxed sintered base. However, on the other hand, it will always be faster than an unmaintained/unwaxed sintered base.

FLAT

FLAT

Flat camber is actually a zero camber. The board is in contact with the surface along its entire length, with the exception of the nose and tail. Thanks to this, the rider‘s weight is distributed more evenly along the length of the effective edge, and eliminates the risk of “getting jammed”. The flat offers a problem-free and smooth ride, and forgives some mistakes.

SINTERED

SINTERED

Sintered base have snowboards of the highest quality. It is made by pressurizing a small polyethylene particles into a desired shape. This will provide monolithic base but with microscopic pores throughout its length. Is precisely these pores which very well absorb the wax and make the base master of speed thanks to maintaining and waxing.

TRIAX

TRIAX

Triax fiberglass increases the stability and sensitivity of the snowboard. It is produced by successive folding of fiberglass fibers into a 45° angular orientation, so the resulting material has the structure of mat. Thanks to this structure the board achieves excellent hardness in torsion and excellent hold in an arc. In the same time it keeps flexion and playfulness.

TWINTIP

TWINTIP

Snowboard shape is perfectly symmetrical for a balanced ride in forward and backward directions. Jibbing, flights and fast ride with a great balance and stability.

WOOD

WOOD

All our snowboards have a 100% wood, specially treated, sanded poplar core, which enables better flexion and board control. The riding properties of a snowboard with such a treated core are ideal for young and light riders.